Designed and Manufactured in Australia our EAB is aproved nationally.
Designed for low speed environments the Energy Absorbing Bollard is a non-redirective crash attenuator that provides protection to pedestrians from out of control vehicles (capable of halting vehicles weighing 1600kg while travelling speeds of up to 60 kmhr )
Available in white, safety yellow or silver finish
EAB has been crash tested in accordance with AS3845.2 demonstrating they can contain a 1600kg vehicle at 51.9km/h with an Impact Energy of 166.3kJ
Another test conducted with a Concrete slab at the surface showed they can contain a 1,615kg vehicle at 62.5km/h with an Impact Energy of 243.4kJ, test no. 21062-02.
AS/NZS 3845.2 CERTIFICATION
The EAB Cartridge is filled with Polystyrene foam which provides shock absorbing capabilities that reduce the risk of injury to vehicle occupants, making it compliant with AS/NZS 1698:2006
EAB Energy Absorbing Bollard MRWA Approved
BOLLARD
Dimension Dia. 150mm x 1550mm
Weight (kg) 67.5
Speed (km/h) 60
Impact resistance: 510 kJ
Colour Standard Colour
Finish Galvanised (F1202002) or Painted (F1202003)
Height 1000mm above ground
CARTRIDGE
Dimension 355.6mm Top and 165mm Bottom x 800mm
Weight (kg) 28.5
PRE CAST CONCRETE BLOCK
Dimension 600mm x 1000mm min depth (32MPa Grade)
Only bollard that meets Australian Crash Barrier Standard
AS/NZS 3845:1999 (60km/h).
• Stops vehicles from entering pedestrian areas while not
restricting pedestrian access
• Energy Absorbing CARTRIDGE safely decelerates the
vehicle and absorbs the energy during collision to protect
vehicle occupant
• Repairable after vehicle impact
• Available in painted or galvanised finish