Replacing Bollards

The bollard is easily removable for events, maintenance or upgrades and ground socket can be capped. If the bollard is badly impacted the internal post bends at ground level and must be replaced (all other components re-usable impact after impact). This is the only replaceable component (see below for altering strength)


Remove security stud

Use security Allen key (supplied with bollard) to remove security stud from base of bollard and simply slip off the bollard cover

Simply slip bollard on & off!

The foot tool or industrial tool is used to remove the Internal securing post, (pin must be inserted to enable use of foot tool).

Simple to Replace

Use Allen key to remove Impact Recovery Rings and screw driver to remove the self-locking Taper from the internal post. 







The wall thickness of the internal securing post determines the frangibility of the bollard and resistance against damage. It can be altered at any time.



  • A Medium Gauge Internal Securing post 3.6 mm wall thickness, is recommended for car-parks and to protect vehicles from damage (poly bollards are also a good ides to reduce vehicle damage)

  • A Heavy Duty 5 mm Internal Securing post can be used to reduce damage to the post if you are experiencing high level of damage using the lighter walled posts (if bollard may be subject to impact from utility vehicles or trucks).

  • A solid steel 60 mm diameter steel rod is inserted if you want to prevent the bollard from deflecting and stop a vehicle in its tracks. (NB: this is stronger than a large 150 mm steel bollard and only suitable for 650 mm depth foundations)




Details on deflection zone, components and installation


  • PayPal